Oil/water heating,stirring/mixing, distillation, reflux
1.GG17 high-borosilicate glass with nice physical-chemical properties; experiment temperature -100 to 400 degree C; Resistant to strong acidic properties of materials; only touching with glass parts & PTFE, no cross-contamination.
2. Precision Mechanical seal stirring to keep high vacuum degree.
3. Glass(PTFE)discharge valve, no-dead angle mixing, fast no residue discharge.
4. Frequency control speed gear motor, smooth running,high torque, automatic booster , no spark, noise free, long life.
5. SUS frame and cast aluminum material kettle body support, simple as well as strong; stable structure
6.Circulating water/oil bath, Heating Mantle
can supply the heating origin; Cooling mode machine:Cool Chiller
, convenient and practical
7. Scientific & innovative structure, practical, strong.
Through the heating coil in the tank heat the transfer medium-water or oil heating,(or heating the kettle body by heating mantle directly). Then the transfer medium pass its hot energy to reaction materials in the kettle.Constant temperature heating and stirring can proceed simultaneously.
Range:It can do all kinds of biochemical reactions and synthesis reactions at a constant temperature condition. It is also a colsed system on the whole.
Circulating Water Vacuum Pump
can pump into the reactor sorts of liquids and gases. The reflux or distillation is possible under different temperature state.
1.Please check whether the glass kettle intact or not, whether each interface is consistent or not. Please handle with care.
2.Wipe each interface with a soft cloth (napkin available),then apply a little vacuum grease.( Vacuum grease must be covered to prevent gray sand from entering after using.)
3. Each interface can not be over-tightened, loosening them periodically, avoid long-term furrowed
causing connector tightened deadly.